Agricultural Paint
Narrow Boat Paint
Industrial Paints
Floor Paints
About Us
Contact Us
Contact Us
Q Premier
Units 5 & 6, Duffryn Ind. Est.
Ystrad Mynach, Hengoed
CF82 7RJ

Tel/Fax: 01443 862948
Industrial Paints


Speedspray CM5 Zinc Phosphate Primer

A quick drying zinc phosphate primer with good adhesion, corrosion resistance and enamel hold out properties,which is designed for application onto steel surfaces. Ideal for cost sensitive environments and fast turnaroud operations.
Download Specification PDF (82Kb)

QDH Primer/Undercoat

A quick drying zinc phosphate anti-corrosive primer/undercoat with good adhesion and corrosion resistance. Has exellent drying and enamel hold out. For use under Alkyd/Acrylic Finish
Download Specification PDF (83Kb)

MIO Primer

This high build coating is an effective primer/intermediate barrier to give maximum protection on exposed steelwork. It provides toughness and abrasion on industrial structures, ideal for use on tanks, bridges,

Etch Primer

Single and 2-pack etch primers are PVB and acid cured primers with outsanding bond strength on non-ferrous metals. Hard dry between 15 and 45 minutes.
Download Etch 1 Specification PDF (200Kb)
Download Etch 2 Specification PDF (203Kb)

T-wash / Mordent solution

Traditional acid based mordant solution for galvinised surfaces. Creatres a suitable surface to accept all priming and topcoat systems.


A water hinnable rust covering primer. It converts sound or firm rust into a stable substrate. A priming coat where only a limited surface premeration is possible. For use on railings, gates, pipework and mst geberal steelwork.
Download Specification PDF (76Kb)

Top coats

AD100 QD Spray Enamel

A high quality quick drying medium build finish, which produces a hsrd, glossy coating. Dry times are short, therfore overcoating are reduced giving fast turnaroud in application. This product exibits high durability, gloss retention and resistance in industrial and agrcultural environments. Ideal oating for machinery and plant, general fabrications where a quick drying premium gloss finish is required. Touch dry in 25 minutes at 20Oc. Available in BS 4800, Ral and BS381c colour Ranges
Download Specification PDF (202Kb)

Alkyd/Acrylic Finish

A high build coating with exceptional UV resistance, flexibility and good chemical resistance. Can be applied to most primed metal surfaces. Ideal for railings, gates, agricultural equipment etc. Can be applied directly to galvanised steel with very good adhesion. Available in BS 4800, Ral and BS381c colour Ranges.



A direct primerless coating fofr containers, machinery and general abrications used in marine, industrial and other aggressiv environments. The product has excellent chip resistance, corrosion and seawater resistance. Availabe as a gloss finish (MD90) or semi-gloss finish(MD60).
Download MD60 Specification PDF (202Kb)
Download MD90 Specification PDF (83Kb)

Coloured solution

A one coat, primerless finish for metal. The coating contains inbuilt corrosion inhibitor specially formulated for aggressive environments. Forms a tough relsilient barrier, impermeable to air and moisture,effectively sealing out corrosion. Ideal for industrial, agricultural and domestic use, on machinery, gates and railings play equipment etc. Contains lead free colours and no hazardous solvents. BS 4800, Ral and BS 381c colours available to order.
Download Specification PDF (197Kb)

Security and Safety Coatings

PC99 Anti-Climb Paint

A non setting coating that acts as a deterrent to burglars and vandels against entry into dangerous areas. For use on drain pipes, sills, tops of walls and fences, trees (to discourage theft of eggs), electricity pylons to prevent access to dangerous areas, telegraph poles, lamp posts to prevent climbing.
Download Specification PDF (73Kb)

Anti Graffiti Coatings

A single pack coating designed to give effecive protection against both graffiti and fly-poster attack . It is a permanent not sacrificial system, allowing for repeated easy removal of any graffiti. For use on a wide variety of surfaces. Available in Matt and Gloss versions, with the matt version effective on normally difficult to protect surfaces such as rough brick. It has been specially designed to minimise any alteration to the appearance of the protected surface.

Farglo Fluorescent Paint

A highly reflective fluorescent 3 coat system designed for specific areas where a high degree of visability is essential and can be applied to wood, metal and concrete. Colour brilliance will not fade and is active to both U.V and daylight. For use on warning signs, skips, vehicle tailboards etc. to identify hazardous objects.
Download Specification PDF (83Kb)

Farglo Basecoat

A white basecoat essntial for Farglo Fluorescent Paint to function
Download Specification PDF (195Kb)

Farglo Protective Lacuer

A clear glaze which exibits good gloss retention,and is a good protective finish for Farglo Flouoresent Paint.
Download Specification PDF (201Kb)